How to Turn a Dresser into a Vanity with a Vessel Sink

Are you looking for a guide on how to turn a dresser into a vanity with a vesselsink? Then we got your solution. It is essential to know that rushing to start your project without the right tips preparesyou to fail and incur a loss.

That is because you will be stuck on the way, and you will have no other alternative rather than quitting. Turning a dresser into a vanity with vessel sinkis an effortless task if you have the right tips.

This article will help you know how to turn your old desk or dresser into a vanity with a vessel sink. Below is a step-by-step guide on turning a dresser into a bathroom vanity. A dresser converted to bathroom vanity with vessel sink involves the following steps;

Steps to making a vanity out of a dresser

Step 1. Prepping the dresser

There is a need to prepare the dresser before using it. Whether you have just bought a new dresser or suing your old one, ensure you do some prepping before use. By prepping the dresser, you will be able to know if it is fit for your project.

For the ones using an old dresser, you need to check if the furniture is suitable for use. If you found some weak cardboard or frames, consider replacing them before proceeding to the next step. That will help in converting furniture to bathroom vanity.

After you confirm that the dresser is good for use, now you can paint it the color you want and make the top part waterproof.

Step 2. Draw the plan

Before you start to drill or fix the sink and other items, it is essential to plan. The plan will help you to stick tothe budget. Also, the plan will indicate everything that you need to complete your project. Thus, before preparing the items you will use, it is good to include everything on the plan.

Step 3. Choose the correct position for the vessel sink

In most cases, it is recommended to place the vessel sink at the center of the dresser. When you put it at the center, the weight will spread uniformly to the other part and thus improve stability. Therefore by placing the vessel sink in the right position, you will know the most appropriate place to fix the faucet.

Step 4. Trace the vessel sink

There are several measurements that you need to take before cutting any piece. Some of the essential measurements to take include the length &width of the vessel sink and the height of the drain pipe.

Step 5. Determine the position for the drain pipe

Since the dresser contains several drawers, it is essential to know the best place to pass the drainpipe at ease. That is because some positions will require you to cut some parts of the drawer. Choose a drain pipe with the best design if you do not want to cut off most drawer parts. There are short well-designed drain pipes that can fit in the drawer. For the people with the straight drain pipe, you will require to cut or drill a hole where the pipe will pass. Always ensure the position of the pipe will not interfere with the closing and opening of the drawers

Step 6. Drill holes and cut in relevant positions

After you are done with the step discussed above, you need to drill holes in asuitable position. The first hole you need to drill is the one at the top of the dresser. That is where the vessel sink will sit. To make drilling holes easy, always get asuitable drilling machine. The second hole to drill is the one for the drain pipe.

Step 7. Install the vessel sink and move the vanity to its final place

Installing the vessel sink and other accessories is the last step for turning a dresser into a vanity with a sink. To install all the accessories, you will need to have silicone or caulk. According to reviews from many people, caulk and silicone are among the best adhesive sealants to use.

Below are the essential steps you need to carry carefully. They include;

Installing the vessel sink

To ensure you fix the vessel sink in the best way possible, you need to

Clean the part you want to install the sink. Apply the adhesive sealant on the surface and place the vessel sink.

Next, ensure you install the faucet well. When installing the faucet, ensure you position it in the best position for enhanced accessibility. Seal the faucet hole with the adhesive sealant and allow it to dry.

After you have installed the faucet and the vessel sink, now secure everything with the caulk. Finish by moving the dresser in its appropriate position and caulk it well in the wall.

Benefits of turning a dresser into a bathroom vanity with vessel sink

There are several benefits of turning your old or new dresser into a vanity. Since the material needed to perform this simple DIY project are cheap and locally available, anyone can try it. Below are some of the top reasons why you need to turn your dresser into a vanity.

  • Vanity with vessel sink improve aesthetic appeal as compared to a dresser
  • Serve various purposes (can serve as a dressing mirror, storage cabinet, sink, and much more.)
  • There are a wide variety of vessel sinks
  • Pocket-friendly project

Frequently asked questions

Question 1

How do you attach a vessel sink to a dresser?


To attach the vessel sink on the top of the dresser, you need to do the following;

Start by tracing the sinkhole

Cut along the traced line and remove the part. You can use the sink template to trace the line on the top of the dresser for accurate measurements

Lay the vessel sink along with the opening and set it to fit well

Coat and seal with appropriate adhesive

Question 2

How do I stop my vessel from moving?


Fitting the vessel sink loosely is among the common thing that makes the vessel sinkto move. Therefore to avoid/prevent vessel moving, you need to ensure you use the suitable adhesive to seal the sink tightly.

Also, avoid using the vessel sink before it sticks to the dresser firmly.

Lastly, you can put an anchoring post and tighten the sink with brackets and screws.


Therefore, if you want to transform your dresser into a vanity with a vessel sink, you need to get a suitable vessel sink, trace the sink using the cardboard template provided.

If there is no cardboard template, consider tracing the sink using a pencil or a marker pen. Cut the dresser along the traced line, clean the region where the sink rim will sit and choose the correct position for the faucet.

Cut the area where the drain pipe will pass through and attach the vessel sink before connecting the drain pipe.

Lastly, apply a strong adhesive and allow the sink to attachfirmlybefore securing the vanity in its final position connected with the plumbing system.

Considering all the steps discussed above, you will learn how to turn a dresser into a vanity with a vessel sink.